Racking SolutionsHeavy Duty Garage Corner shelving kit, 1 Corner unit 1800mm x 900mm x 450mm FREE Next Working Day Delivery *

Shelves are okay. Slots don’t line up on every piece so more fiddly to put together than it needed to be. Still went together but took longer than a similar shelving unit I have. Only other issue is the 3 components of the units aren’t the same the corner unit is a different blue and the shelves don’t align to make a continuous shel across the three parts. Not an issue fir me but could be for some. Overall wouldn’t recommend or buy again, better on the market fir the same money.

This shelving unit will carry a huge weight compared with its own weight, and this is its best feature. However, the manufacturing quality is not what it should be. The shelves are attached to the upright by pairs of tabs that have to be hammered downward into slots in the verticals. It is often quite difficult to get both tabs to go into their respective slots (one above the other) at the same time, particularly when the last side of each layer is hammered in.The verticals are made up of two sections, and a special plate is used to join them together. The plate is a corner piece, that fits inside the top of the vertical, and has tabs that have to be hammered into the top slot on each of the two sides of the bottom vertical, and the bottom slot of each of the two sides of the upper vertical. It was completely impossible to hammer the tabs into these slots - they just hit the side of the slot. To get this to work, I had to widen the top slots of each bottom vertical, and bottom slots of each top vertical, and then bend out the tabs of the joining piece by the width of the tab. Only then was it possible to hammer the joining piece in to the top and bottom verticals, to join them together.Finally, when I installed the MDF shelves, one edge always caught on the slot edges, which stick out on the insides of the verticals. It was difficult to manoeuvre the shelves into place because of this, and two of them suffered minor damage due to the shelf having to be forced down over the last slot edge of one vertical to reach the horizontal support.There are no guides as to where the shelves are to be placed. I would recommend shelves top and bottom, as shown, and one shelf immediately above the join between bottom and top halves of the verticals. The other two shelves to be placed symmetrically - or asymmetrically if you want a particularly deep shelf layer

Bought when I moved house as the garage had no shelving. I found it easy and quick to assemble. The corner unit does have a stay across (amost} the middle, and as one review had mentioned that there wasn't one, I thought this worth stating. The assembled units slid easily into position across a concrete floor. I fastened the side units to the corner unit with 6mm bolts (it is pre-drilled) and fixed the whole to the walls with a couple of screws.The only thing that didn't work well was that with the top shelves in their highest position, I couldn't get the plastic covers on the uprights - but they don't really need to be fitted. Recommended - if the shelves stand the test of time!

The corner unit was difficult to get started single handed (for a 5’1” female!).I managed to assemble all 3 units singlehanded. Annoyingly not all of the ‘nibs’ slotted in correctly and took a lot of patience.All in all, although not perfect, I find this unit accommodates all my storage needs.Would recommend to tenacious DIYers 😜

Easy to assemble. Sturdy and has created ample space in our garden shed

Arrived on time and easy to put together. Beware of the shelving however, especially the corner units. I think the material of the shelves is some sort of hardboard that tends to absorb water (not great in a damp shed). A week with a car battery on one of the corner units saw the shelf bend and collapse in damp conditions. Side shelving is supported underneath and is fine so far.

They are sturdy and perfect for my needs. There is a but though...the wooden shelving isn't quite as thick as I wanted so I think I will have to replace these in time. We put tins of paint and the wooden shelf is bowing a bit. In general though, I am happy with this shelving unit.

These shelves are a pain to put up , a lot of the joining pieces where bent so that means you have to try and straighten them as you are building and then takes double the time to build. I don’t know if this is a manufacturing problem or a delivery/ transportation/packing fault . Once the shelves are built they are very sturdy and quite strong........ so I am happy with them now there built .