DIY Headliner Repair Fabric Compatible with Chevy Silverado-GMC Sierra-Medium Dark Gray-80"x57"

Sturdy and attractive and did well with 3M headliner adhesive. I was pretty deliberate but in some contoured places I could not get it to stretch far enough to let the adhesive grab so it never had a chance. If your headliner has a lot of recesses for grab handles, etc. do yourself a favor and buy something more stretchy. Otherwise was great and I would use it again for a simpler job. It did fine where I wrapped it around the ends and was able to clamp it. It was too thick for the sliding sunroof shade but I would not say it's "too thick" in general. I would not want less foam for the rest of the job because if it's too think you risk adhesive soaking through and being visible.

Looks like OEM gray color. Have 2003 Chevy extensded cab. Watched YouTube videos...looked easy. Not so easy. The fiberglass headliner is large and has many curves that made it really difficult. I had to get help. Also, you must wait for the spray glue to air out before you stick the headliner down, especially in the rounded corners or it will pull up/not stick. Literally do 12-18" squares focusing on the curves to make sure everything sticks down properly and try not to spray too much at a time. You cannot unstick this stuff to fix mistakes. I ended up having a few creases, and ripped it all off, scraped it with a wire brush (by hand) and did it all over again.

Ordered this for my sons 2003 GM Silverado Ext cab. Worked great and looks amazing over the sagging stinky stock headliner.

Yes this product was easy to work with and turned out nice as well. It molds well to the new style of molded headliner

Good product worked well and i got in touch with the seller and was able to buy enough to do the sunvisors also

Quality material.

Ok

It looks exactly like the headliner from the factory. It was easy to apply and replace the original. Don't use too much adhesive or it will cause "dents" or low spots to appear. Use a generous amount of adhesive with a good even application between the headliner material and the backing board, but be careful not to pool the adhesive or it will absorb all the way through the material causing low spots when you press down on it.